Nissan 240SX Power Steering Fitting Return Side M16x1.5 to AN-6

Power Steering Fitting for 240SX Nissan Pressure Side M16x1.5 to AN-6

Power steering fitting designed specifically for the S-chassis steering rack.

M16x1.5 fitting on the return line that goes from the steering rack back to your reservoir or to a cooler.

Our unique fitting is designed to convert the stock tube/o-ring fitting to an AN-6 fitting. This is necessary when running braided high pressure lines in your power steering system. AN fittings make install of high-pressure lines easy and worry-free. Once you install this conversion fitting, you'll never need to take it off again. 

Unlike most "universal" power steering fittings on the market, ours are designed to seal perfectly on the 240SX steering rack. Includes Viton o-rings to withstand the high-temperature demands of drifting and other extreme loads on the power steering system.

NOTE: We recommend replacing the o-ring whenever fitting is removed from the steering rack. For replacement o-rings for this fitting: