Mcloed 1400 Series Hydraulic Bearing:GM: T-56,T-56 Mugnum,T-56 Magnum F

Mcloed 1400 Series Hydraulic Bearing:GM: T-56,T-56 Mugnum,T-56 Magnum F, Transmissions:Ea

McLeod Racing 1400 Series Bearing. The McLeod Racing 1400 series bearing are intended for applications where your "A" dimension is greater than 3" in most applications (T-56/TR-6060 Excluded) This series is made for all your common old school transmissions, including Muncie, T-10/Super T-10. Saginaw, Toploader, T-5, TKO 500/600 and the all new TKX 5 speed. This bearing slides on the guide tube (candlestick). This bearing adjusts with a adjustment screw that registers the bearing assembly center on the transmissions guide tube. The 1400 Series bearing is offered as a stand alone option or paired with a universal matching 3/4" bore Wilwood master cylinder with a remote reservoir.

• Manufactured from 6061-T6 Aerospace Quality Aluminum
• Bright Dipped Red Anodized for Durability
• (2) 12" Stainless Steel Braided Hoses with AN-4 Connections. (1) Supply Line, (1) Bleed Line.
• Uses Ethylene Propylene based rubber o'rings. Fully rebuildable using rebuild kit 139115  https://www.mcleodracing.com/hydraulic-clutch-parts-139115/p2
• Uses an adjustment screw to vary the height and helps you fine tune your clearance. https://youtu.be/21tBaYepYU8

       How to Establish your "A" Dimension.
     
       https://www.mcleodracing.com/blog/how-to-determine-your-a-dimension-using-hydraulic-bearing-muncietoploadert-5t-10/200

This is to be used with 1998-Up LS-X production T-56. 1992-Up Dodge Viper Production T-56. 2010-Up GM TR-6060. Tremec T-56 Magnum Aftermarket Transmissions. This Will NOT fit 1993-97 LT-1 Camaro/Firebird T-56 transmission.

**Line kit is designed for Wilwood 3/4 master, you must include what chassis the line kit will be used on**