Flex-A-Lite 420 Dual 12 inch Puller Auto Electric Fans 2500 CFM   For lots of cooling power in a little bit of space, install one of Flex-a-lite's low-profile S-Blade universal electric fans. They're only 2 5/8 in. deep, but the 15 in. wide x...

1988-2002 Toyota Gates Racing Timing Belt   1988-2002 Toyota Gates Racing Timing Belt for 1jzge 1jzgte Belts are precision ground, not cut, so they fit the pulley with absolute perfection Durable nylon fiber provides extra wear resistance, doubling tooth strength Aramid reinforcement in a...

1992-1998 Toyota Supra Gates Racing Timing Belt   1992-1998 Toyota Supra Gates Racing Timing Belt Belts are precision ground, not cut, so they fit the pulley with absolute perfection 143 Teeth, 1 inch(25mm) top width, .315 inch(8mm) pitch, 45.039 inch(1144mm) pitch Length of stock...

Suspicious Garage steel braided power steering line for 1UZ 2UZ 3UZ into S-Chassis Included -6AN fittings for rack and pump -6AN PTFE hose with crimped JIC 37° swivel 90° stainless fittings 304 Stainless Steel braid Can handle extreme temperatures -100°F to +450°F Suspicious Garage...

1jz 2jz w/o AC Serpentine Belt

ARP 330 2802 Pro Series Flywheel Bolt Kit Flywheel Bolts, Pro Series, Chromoly, Black Oxide 12-Point, 11mm x 1.5 in. Chevy, 4.8, 5.3, 5.7, 6.0L, LS1, LS6

VVTi 1JZ 2JZ Water Temp Adapter Converts the OEM gauge port to 1/8 NPT *SENSOR NOT INCLUDED, PICTURE FOR REFERENCE ONLY* **Verify your 1JZ 2JZ uses the bigger type water temp sensor for the gauge cluster, early 1JZ 2JZ use a small type gauge...

1989-1994 Nissan 240sx SG 1jz Upper Heater Hose Conversion for S13 1989-1994 Nissan 240sx SG 1jz Upper Heater Hose Conversion for S13 *Fits both VVTi and non-VVTi

1988-1995 Toyota Marlin Crawler VSS Vehicle Speed Sensor   1988-1995 Toyota Marlin Crawler VSS Vehicle Speed Sensor   This magnetic 3-wire, 4-pluse amplifier will convert ANY Toyota vehicle with a standard 22x1.50 mechanical speedometer drive to an electronic speedometer system. It is designed to...

Suspicious Garage steel braided power steering line for 1/2JZ into 350z and G35 Chassis Included -6AN fittings for rack and pump -6AN PTFE hose with crimped JIC 37° swivel 90° stainless fittings 304 Stainless Steel braid Can handle extreme temperatures -100°F to +450°F Suspicious...

  R154/W58 Bell Housing Bolt Set   This bolt set will bolt a JZ bell housing to block on R154 or W58 transmission. Includes bolts with lock washers coated black.

1989-1994 Nissan 240sx Syko Performance RB20 RB25 RB26 S13 Sway Bar Spacers   1989-1994 Nissan 240sx Syko Performance RB20 RB25 RB26 S13 Sway Bar Spacers **Backordered no ETA from Syko Performance on more sets** CNC machined T-6 aluminum sway bar spacers Relocates the stock...

Suspicious Garage Toyota 1JZ 2JZ Oil Cooler Delete Stud Remove the stock oil cooler and pedestal assembly.  When installing the JZ into other chassis the stock oil cooler and pedestal take up precious room, this eliminates the stock clutter as well as the fact...

1989-1994 Nissan 240sx OEM Fuel Pump Gas Tank O-Ring Gasket for S13 1989-1994 Nissan 240sx OEM Fuel Pump Gas Tank O-Ring Gasket for S13  17342-01A00

1989-2000 Nissan 240sx Silvia OEM Transmission Rubber Boot Cover for S13/14/15 1989-2000 Nissan 240sx Silvia OEM Transmission Rubber Boot Cover for S13/14/15 Genuine OEM Nissan Rubber Boot Transmission Cover for KA24DE SR20DET 71c Replaces ripped and worn out transmission rubber covers. Transmission oil can...

Clutch line is made from 304 stainless steel wire braid hose with PTFE Teflon inner core.  Hose has a burst pressure of 9000psi. Comes with banjo bolt and crush washers at the clutch master.   **This fits the W, V and R-Series Transmission**

1989-1998 Nissan 240sx Suspicious Garage Clutch Line for S13 S14   1989-1998 Nissan 240sx Suspicious Garage Clutch Line for S13 S14   Clutch line is made from 304 stainless steel wire braid hose with PTFE Teflon inner core.  Hose has a burst pressure of...

Suspicious Garage Clutch Line for 350z Z33 CD005 CD007 CD009 Trans in S-Chassis *For external slave only Clutch line is made from 304 stainless steel wire braid hose with PTFE Teflon inner core.  Hose has a burst pressure of 9000psi. Comes with banjo bolts...

Suspicious Garage Clutch Line for 1JZ 2JZ in S-Chassis   Suspicious Garage Clutch Line for 1JZ 2JZ using R154 in S-Chassis W and V series available. As well as CD, ZF, Getrag, Etc.  Clutch line is made from 304 stainless steel wire braid hose...

1992-1998 Toyota Supra OEM Coil Pack for Non-VVTi 1JZ 2JZ   1992-1998 Toyota Supra OEM Coil Pack for Non-VVTi 1JZ 2JZ This is a brand new OEM coil pack for the 1/2JZ   Make sure to order the quantity you need as the price...