1996-2002 Toyota VVTi 1JZ 2JZ Pulley, Camshaft Timing     1996-2002 Toyota VVTi 1JZ 2JZ Pulley, Camshaft Timing VVTi 1JZ 2JZ cam gear, new factory Toyota part Fits all Lexus and Toyota VVTi JZ engines, 1JZ and 2JZ, turbo and non-turbo     13050-46010...

1JZ/2JZ Pulley Kit   V2.0, 6061 Aluminum. This is the 3pc pulley kit without a belt. The alternator and power steering pulleys will fit the 1JZ or 2JZ, but the fan pulley will only fit a 2JZ or a 1JZ using a mechanical fan...

VALVE ASSY, CAMSHAFT TIMING OIL CONTROL 15330 46010 15330 46011   *Fits both 1jz and 2jz vvti

1995-1998 Nissan 240sx Steering Package S14   Rebuilt S14 steering rack, Energy Suspension Rack Bushings, EMPI Steering Boots, High Pressure Power Steering Line (JZ/RB/KA/SR Options)

R154 Pressure Plate Hardware 6 cap head bolt with 6 washers

OEM Toyota 1JZ 2JZ Serpentine Belt Tensioner 16620 46070  

1995-1998 Nissan 240sx Suspicious Garage S14 Driveshaft for 1JZ 2JZ with CD00x z33 350z Transmission   *Special Order Item* 1995-1998 Nissan 240sx Suspicious Garage S14 Driveshaft for 1JZ 2JZ with CD00x z33 350z Transmission Steel 1-piece replacement shaft for the S14 platform. It uses an...

1989-1994 Nissan 240sx Suspicious Garage S13 Driveshaft for 1JZ 2JZ with CD00x Z33 350z Transmission   *Special Order Item* 1989-1994 Nissan 240sx Suspicious Garage S13 Driveshaft for 1JZ 2JZ with CD00x Z33 350z Transmission Steel 1-piece replacement shaft for the S13 platform. It uses an...

1988-2004 Lower Oil Pan for Rear Sump 1JZ 2JZ 12102-46031

1998-2005 Lexus IS300 GS300 Lower Oil Pan for Front Sump 1JZ 2JZ   1998-2005 Lexus IS300 GS300 Lower Oil Pan for Front Sump 1JZ 2JZ 12102-46040

Suspicious Garage 1jz 2jz Fuel Rail Adapter 12mm Banjo to 5/16" (8mm) Barb   Suspicious Garage 1jz 2jz Fuel Rail Adapter 12mm Banjo to 5/16" (8mm) Barb 12mm Banjo to 5/16" (8mm) Barb Fits feed side of the rail for use with standard 5/16...

Flex-A-Lite 420 Dual 12 inch Puller Auto Electric Fans 2500 CFM   For lots of cooling power in a little bit of space, install one of Flex-a-lite's low-profile S-Blade universal electric fans. They're only 2 5/8 in. deep, but the 15 in. wide x...

1jz 2jz w/o AC Serpentine Belt

VVTi 1JZ 2JZ Water Temp Adapter Converts the OEM gauge port to 1/8 NPT *SENSOR NOT INCLUDED, PICTURE FOR REFERENCE ONLY* **Verify your 1JZ 2JZ uses the bigger type water temp sensor for the gauge cluster, early 1JZ 2JZ use a small type gauge...

1988-1995 Toyota Marlin Crawler VSS Vehicle Speed Sensor   1988-1995 Toyota Marlin Crawler VSS Vehicle Speed Sensor   This magnetic 3-wire, 4-pluse amplifier will convert ANY Toyota vehicle with a standard 22x1.50 mechanical speedometer drive to an electronic speedometer system. It is designed to...

Suspicious Garage steel braided power steering line for 1/2JZ into 350z and G35 Chassis Included -6AN fittings for rack and pump -6AN PTFE hose with crimped JIC 37° swivel 90° stainless fittings 304 Stainless Steel braid Can handle extreme temperatures -100°F to +450°F Suspicious...

  R154/W58 Bell Housing Bolt Set   This bolt set will bolt a JZ bell housing to block on R154 or W58 transmission. Includes bolts with lock washers coated black.

Suspicious Garage Toyota 1JZ 2JZ Oil Cooler Delete Stud Remove the stock oil cooler and pedestal assembly.  When installing the JZ into other chassis the stock oil cooler and pedestal take up precious room, this eliminates the stock clutter as well as the fact...

Clutch line is made from 304 stainless steel wire braid hose with PTFE Teflon inner core.  Hose has a burst pressure of 9000psi. Comes with banjo bolt and crush washers at the clutch master.   **This fits the W, V and R-Series Transmission**

Suspicious Garage Clutch Line for 1JZ 2JZ in S-Chassis   Suspicious Garage Clutch Line for 1JZ 2JZ using R154 in S-Chassis W and V series available. As well as CD, ZF, Getrag, Etc.  Clutch line is made from 304 stainless steel wire braid hose...