Discontinued - New Model Coming Soon   1989-1998 Nissan 240sx Tomei Expreme Turbo Exhaust Manifold KA24DE   4-2-1 Pipe Layout Austenitic Ductile Cast Iron SR20DET Turbo Flange Type/Size

 1989-2000 Nissan 240sx Silvia Sr20det Turbo Oil Feed Line for S13 S14 S15 Oil Feed is made from stainless steal braided hose, -3 90 degree fitting at the turbo and M12 banjo at the block, for use with stock banjo bolt.   Available with...

1989-2000 Nissan 240sx Suspicious Garage KA24DET Turbo Feed Line for S13/14/15   1989-2000 Nissan 240sx Suspicious Garage KA24DET Turbo Feed Line for S13/14/15   Turbo feed line from oil block to bottom mount turbo, using Tomei or similar bottom mount manifold.

1991-1998 Nissan 240sx Future Fab KA24DET Manifold   **Made to order** 1991-1998 Nissan 240sx Future Fab KA24DET Manifold    MADE IN THE U.S.A. and Includes Lifetime Warrenty Against Cracking to Original Buyer. Thick Wall Sch40 Stainless Pipe Fully Tig Welded and Back Purged. TWO...

1998-2002 Toyota Chaser Mark II Cresta Blitt Crown Verossa CT15b Turbo Steel Wheel Conversion   1998-2002 Toyota Chaser Mark II Cresta Blitt Crown Verossa CT15b Turbo Steel Wheel Conversion   CT15b Turbo Steel Wheel Conversion Offering both core exchange and no core option -6AN...

Future Fab Nissan SR20DET V-Band Top Mount Manifold   Future Fabrication SR20DET V-Band Top Mount Manifold   MADE IN THE USA and Includes Life Time Warranty to original buyer Thick walled Stainless Steel 1 1/4 Inch SCH40 Runners Fully Tig Welded/Back Purged Option of...

Future Fab Toyota 1JZGTE VVTi T4 Twinscroll Manifold  *Made to order* Product Description Future Fabrication 1JZGTE VVTI Twinscroll T4 Manifold   MADE IN THE USA and Includes Life Time Warranty to original buyer Thick walled Stainless Steel 1 1/4 Inch SCH40 Runners Fully...

Future Fab Toyota 1JZGTE VVTi T4 Twinscroll Manifold   *3 week lead time*

Future Fab Toyota 1JZGTE VVTI V-Band Exhaust Manifold       3-4 week lead time. Built to order. Please leave a note on which turbine flange and chassis.

Future Fab Toyota 2jzge Exhaust Manifold  Future Fab Toyota 2jzge Exhaust Manifold Product Description Made in the U.S.A Thick Wall Stainles Steel Construction  Fully Tig Welded and Back Purged  45mm Wastegate Flange Standard 50mm Wastegate Flange Option, Just Ask in Notes 3" O.D. Turbine...

Future Fabrication Next Gen Sr20det Turbo Manifold   Future Fabrication Next Gen Sr20det Turbo Manifold MADE IN THE USA and Includes Life Time Warranty to original buyer Thick walled Stainless Steel 1 1/4 Inch SCH40 Runners Fully Tig Welded/Back Purged Option of 38mm MV-S...

GT Turbo Drain Tube with -10AN   GT Turbo Drain Tube with -10AN -10AN male welded for attaching soft line to engine return 8" drain tube for manifold clearance

Nismo 7 layer exhaust gasket for S13/S14/S15. This manifold gasket is the OEM gasket for the S15 motor but is a great upgrade for the S13/S14 motors. This gasket ensures better seal and is more durable than the conventional carbon paper gasket. This gasket...

Nissan OEM 4 bolt gasket for the turbo inlet to manifold.   OEM Nissan  Fits all T2 4 bolt Turbo i.e. T25, T28, GT2871, Borg-Warner EFR small frame, etc   14415-17M00

Nissan OEM SR20DET Turbo Turbine Outlet Gasket This is the gasket that sits in the exhaust side turbine to the O2 extension The OEM Nissan item is much better than the cheaper gasket commonly found on lower end turbo kits.     Multi-layer design seals better...

Suspicious Garage S13 Sr20det PTFE Turbo Lines using S14 Style Neck   Suspicious Garage S13 Sr20det PTFE Turbo Lines using S14 Style Neck -6AN Metric adapters -6AN PTFE Hose with crimped ends Steel Braided Hose with 6000psi Burst Pressure Oil Feed is made from...

Suspicious Garage S13 Sr20det Turbo Lines using S14 Style Neck   Suspicious Garage S13 Sr20det Turbo Lines using S14 Style Neck -6AN Metric adapters -6AN Swivel-Seal Hose Ends Steel Braided Hose with 6000psi Burst Pressure Oil Feed is made from DOT approved stainless steal...

Suspicious Garage S14 Sr20det PTFE Turbo Lines   Suspicious Garage S14 Sr20det PTFE Turbo Lines -6AN metric adapters -6AN PTFE Hose with crimped ends Steel Braided Hose with 6000psi Burst Pressure Oil Feed is made from DOT approved stainless steal braided hose, -3 90...

-6AN metric adapters -6AN  Swivel-Seal Hose Ends Steel Braided Hose with 6000psi Burst Pressure Oil Feed is made from DOT approved stainless steal braided hose, -3 90 degree fitting at the turbo and M12 banjo at the block, for use with stock banjo bolt....

Syko Performance Rb25det Exhaust Elbow Designed to solve LHD steering shaft clearance problem (other kits don't address this safety issue) Works with any SR20DET downpipe (not included) fora true bolt on fitment Quality built 16 gauge full stainless steel construction       3"...