Geomaster 3 Intro
Many enthusiast lower their car to provide improved center of gravity and handling but at the cost of the suspension no longer being in the designed range resulting in degraded handling and less than optimum suspension gain changes. With the S-chassis being a Mcpherson front and multilink rear this also affects the roll center in which the roll center difference between the front and rear suspension resulting in unbalancing the chassis.
The suspension needs be modified to get all the benefits from lowered car. The best solution would be specially designed suspension with performance oriented kinematics, but this might be expensive. The easiest and most cost effective would be drop knuckle, that works with OEM links and arms.
Geomaster 3 is Wisefab designed and Driftworks tested drop knuckle set for Nissan S-Chassis. It has structural high strength steel design for optimized weight, strength and stiffness.
Front Drop Knuckle: Improvements in steering lock, drop and kinematics over the already fantastic Geomaster 2.
Provisions for ABS sensors & we’ve tested to the absolute limits of what is achievable while retaining a front anti roll bar.
The front also now have a track / grip setting with an entirely separate lower arm and tie rod mount. This provides all of the roll centre benefits found in the drift setting. While providing just a slight increase in steering speed over standard knuckles, and ackerman settings for grip driving.
- 45mm Drop without changing the height at the coilover the knuckles provide a 50mm drop on their own.
- Speed sensor attachment
- Over 20% quicker steering ratio
- Less Ackermann
- Better bumpsteer for high caster
- Over 30% quicker steering ratio
- A lot less Ackermann (don’t ask us that’s what driftworks said)
- More trail and self alignment torque
Rear: Improvements in drop & kinematics. All new spherical bearings in place of bushes for less camber and toe deflection. Double brake caliper mounts & improved overall rigidity.
- Slightly less camber gain vs stock
- All spherical joints (Less stiction allows suspension to move freely without bind)
- 50mm Drop (Lowers car 45mm just from installing)
- Dual Caliper setup
- Made of high strength steel
The new coating: We have chosen a zinc + polyurethane process, offering impressive durability, and vast improvements in corrosion resistance.
Requires the use of S14/S15 front hubs and S14 balljoints pressed into the S13 lower control arm or the use of an s14 lower control arm
These are a racing part, and as such are not suitable for road use
Related productsview more items
X7 Cressida Steering Rack and Pinion Fits X8 with passenger side conversion bushing https://suspiciousgarage.com/products/mx-83-chassis-to-mx73-rack-conversion-passenger-side-only *No Core* **1 year limited warranty**
ALUTEC tripple tubed CNC'ed aluminum front strut brace for all S13 and S14 240SX. This bar is the only bar on the market to accomodate clearance for all the common type motor swaps I.E KA24, SR20 (includes Hybrid Swaps), and...
ALUTEC trippled tubed CNC'ed aluminum rear trunk brace for all S13 89-94 240SX. Reinforce the rear section of your trunk, brace attaches to the 4 bolts for the rear bumper support for added regidity.* Make sure your car wasn't rear...
ALUTEC front tension under brace (H-Bar) is similar to the Nismo Power brace. The bar embrace the tension rods for front end rigidity, in return cornering performance is improved greatly over stock